Washing of heavily oiled solid waste facility

Washing of heavily oiled solid waste facility

Type of facility: Fictitious facility

Address: Specify here the address of the facility.

Contact: Specify here the name of the contact person in the company.

Telephone:

E-mail:

Fax:

Description:
Washing the solid waste from the oil before the storage or other final disposal using various techniques:
==> Cold Water Flushing, simple technique, moderately successful, to wash large quantities of oiled debris with a high pressure hose to loosen and float away oil. The resulting oil/water mixture can then be treated via a separator
==> Warm/Hot Water Flushing to clean pebbles, gravel and sand contaminated with oil or emulsion, using standard mineral processing equipment coupled to a conventional oil/water separator.
==> High velocity steam jets directed onto an inclined, vibrating, perforated tray placed above a collector to trap oil and condensate, may be used to clean oil-contaminated sand. Possible use of demulsifier.
==> Solvent Extraction may be considered as a possible mean of removing oil from collected sand, pebbles and debris. Limited research has been carried out in relation to the use of this technique.

Type of waste accepted:

To be defined for the specific facility in country.


Entry criteria, pretreatment required and general treatment capacity:

To be defined for the specific facility in country.


Logistical and operational requirements and constraints:

To be defined for the specific facility in country.


Energy, water and other input required (nature and amount per ton treated):

To be defined for the specific facility in country.


Nature of product that can be accepted:

To be defined for the specific facility in country.


Reception installation in facilities / Reception equipment available in the facility:

To be defined for the specific facility in country.


Quality of produced material (from the waste):

To be defined for the specific facility in country.


Potential environmental impacts:

To be defined for the specific facility in country.


Legal constraints:

To be defined for the specific facility in country.


Efficiency and general cost:

To be defined for the specific facility in country.


Latitude:
Longitude:
published on 2019/12/10 15:55:06 GMT+0 last modified 2019-12-10T15:55:06+00:00