Company for Land filling (controlled containment in specialized cells and/ or landfills)

Company for Land filling (controlled containment in specialized cells and/ or landfills)

Type of facility: Fictitious facility

Address: Specify here the address of the facility.

Contact: Specify here the name of the contact person in the company.

Telephone:

E-mail:

Fax:

Description:
Storage in landfills or specialized industrial waste storage or specialized cells. Oil spill debris can also be incorporated into an active landfill along with municipal refuse or industrial wastes.
 
Co-disposal with domestic waste may also be considered. Oil can biodegrade slowly with the domestic waste and also remains absorbed by all type of domestic waste, with little tendency to leach out. “As a general guide, oily waste should be deposited on a top of at least 4m of domestic refuse either in surface strips 0.1m thick or in silt trenches 0.5m deep to allow free drainage of water. The oily material should be covered by a layer of soil followed by a minimum of 2m of domestic waste to facilitate degradation (...)”. Source: IMO.
 
Burial is another landfilling option. Oil spill debris is deposited into pits, trenches or other depressions prepared for debris disposal onsite. The excavated soil is used as intermediate and final cover of the debris.

Type of waste accepted:

To be defined for the specific facility in country.


Entry criteria, pretreatment required and general treatment capacity:

To be defined for the specific facility in country.


Logistical and operational requirements and constraints:

To be defined for the specific facility in country.


Energy, water and other input required (nature and amount per ton treated):

To be defined for the specific facility in country.


Nature of product that can be accepted:

To be defined for the specific facility in country.


Reception installation in facilities / Reception equipment available in the facility:

To be defined for the specific facility in country.


Quality of produced material (from the waste):

To be defined for the specific facility in country.


Potential environmental impacts:

To be defined for the specific facility in country.


Legal constraints:

To be defined for the specific facility in country.


Efficiency and general cost:

To be defined for the specific facility in country.


Latitude:
Longitude:
published on 2019/12/10 15:55:06 GMT+0 last modified 2019-12-10T15:55:06+00:00