Emulsion breaking facility

Emulsion breaking facility

Type of facility: Fictitious facility

Address: Specify here the address of the facility.

Contact: Specify here the name of the contact person in the company.

Telephone:

E-mail:

Fax:

Description:
Breaking up of emulsion of water in oil to water and oil phases, either on site or in a suitable facility plant. Water in oil emulsions are very viscous and may contain up to 50 to 80% of water.
==> Unstable emulsions can be broken by simple decantation or by heat treatment followed by decantation. The oil/water mixture should preferably be heated by circulation through an external heat-exchanger.
==> Stable emulsions can be broken up by using demulsifying chemicals, which should be used as early as possible. The recommended dose rate varies with the type of oil and the age of the emulsion, but are usually very low (ranges from 250 to 5,000 ppm). Process lasts a minimum of 10 to 20 minutes.

Type of waste accepted:

To be defined for the specific facility in country.


Entry criteria, pretreatment required and general treatment capacity:

To be defined for the specific facility in country.


Logistical and operational requirements and constraints:

To be defined for the specific facility in country.


Energy, water and other input required (nature and amount per ton treated):

To be defined for the specific facility in country.


Nature of product that can be accepted:

To be defined for the specific facility in country.


Reception installation in facilities / Reception equipment available in the facility:

To be defined for the specific facility in country.


Quality of produced material (from the waste):

To be defined for the specific facility in country.


Potential environmental impacts:

To be defined for the specific facility in country.


Legal constraints:

To be defined for the specific facility in country.


Efficiency and general cost:

To be defined for the specific facility in country.


Latitude:
Longitude:
published on 2019/12/10 15:55:06 GMT+0 last modified 2019-12-10T15:55:06+00:00